Genesis bollard and barrier

Design Alfredo Tasca

The Genesis bollard and barrier is available in three sizes: Ø 76mm, 800mm high, Ø 102mm, 700mm or 1000mm high and Ø 168mm, 600mm high. The lower part of the bollards are made of hot-dipped galvanized steel, polyester powder coated. The upper part, 150mm high, are electropolished stainless steel. The connection between the two parts is mechanic, with the characteristic of having no visible screws. Ground fixing can be either be with suitable steel bolts (not included) or by concreting the extension 150mm deep into the ground. All fixings are stainless steel.

The Genesis barrier is made up of vertical modular Ø102mm Genesis elements; the lower part of the bollard is made of hot-dipped galvanized steel, polyester powder coated, whilst the upper part, 150mm high, is electropolished stainless steel. The vertical post elements, 1500mm apart, are solidly connected together with 50mm galvanized and polyester powder coated steel tubes, mechanically fixed with the appropriate fixings and a Ø 5mm stainless steel rope, arranged in an “X” in between the two supports. Ground fixing can either be with suitable steel bolts (not included) or by concreting the extension 150mm deep into the ground. The Genesis barrier can be assembled on inclined levels up to the following values: 8% slope, minimum curve radius: 11 meters. All fixings are stainless steel.

Finishes and Materials

Sizes and Configurations